- Toyota Superchargers
- >
- Supercharger Nosedrive Service Kit Toyota 3.4L 1st & 2nd Gen TRD M62 Gen3 M62 Gen4
Supercharger Nosedrive Service Kit Toyota 3.4L 1st & 2nd Gen TRD M62 Gen3 M62 Gen4
Toyota 3.4L V6 5VZFE 1st and 2nd TRD Eaton Supercharger Nosedrive Snout Rebuild Kit
4Runner Tacoma T100 Parts for Eaton M62 Gen3 & M62 Gen4
Shipping to USA domestic addresses is included in the price.
What does this item include?
This item includes the same high-quality parts we use in our supercharger rebuild services.
1. Two AC Delco supercharger oil, 4-ounce bottles (2)
2. Permatex anaerobic gasket maker for aluminum flanges, a red sealer (1)
3. Coupler prepared with installation grease (1)
4. Back nosedrive ball bearing (1)
5. Front nosedrive ball bearing (1)
6. Viton front nosedrive seal with double-seal internal diameter, prepared with installation grease and oil on internal diameter of the lips of the seal. (1)
7. Nosedrive Rotoclip™, a quality replacement of original wire retaining clip (1)
8. Plastic Syringe with tubing for oil extraction (1)
9. Needle Bearing Pair, Single-seal* cup-type needle bearings, to install sub-flush below surface of interior housing face that the bearings are being pressed into. (2)
[*Optional upgrade available to Double-seal needle bearings for additional, message seller to add.]
10. Nosedrive shaft lock-washer flange nut, Zinc-plated (1)
[*Optional upgrade available to a stainless-steel nut for additional, message seller to add.]
***The price includes shipping to USA addresses. ***
This kit contains the parts and other items needed to complete the supercharger nosedrive assembly rebuild service yourself, along with replacing the housing needle bearings. This item is Quality Control checked. As an informed DIY Do-It-Yourself person, you are purchasing this item to complete the rebuild service yourself. You are making the decision to take upon yourself the responsibility of the successful outcome. If you decide at any point to have a professional perform this service, send it in. The parts for the supercharger nosedrive assembly are correct when this item leaves the shop. Damage that occurs after the point where it is packaged for shipment from us, is completely on the mechanical person performing the rebuild service, whether you or your mechanic. No refunds will be given however, if you run into issues, contact us first because we can help.
These TRD 3.4L superchargers are in high demand. Not necessarily easy to come by. Our Shop Foreman designed this kit to be the quickest way to put a supercharger you already own back into service, with much of the work performed by you or your mechanic, to help with cost and turnaround time savings. This kit is especially great for automotive repair shops where the mechanic can keep the cost and turnaround time down by completing the less difficult work in his repair facility. This item is a do-it-yourself rebuild kit. It comes with a parts kit to rebuild the Eaton M62 Snout Nosedrive. We also offer a Complete Supercharger Rebuild Kit that includes a ready to install rotor assembly with new rotor coating also available through our eBay store.
Will this fit the vehicle application of the supercharger being serviced?
This kit is applicable for Eaton M62 superchargers used in Toyota TRD 3.4 Liter 5VZ-FE engine vehicle applications. For complete list of compatible vehicles see compatibility chart. Please contact us if you need help to make sure your supercharger is this kind. We have friendly, helpful technical people available by email or phone to answer the lingering questions you have. Just ask.
What can be done to confirm this is the right item for the supercharger's vehicle application?
We are happy to help you make sure you order the right part for the job. If you have ANY DOUBTS about this being the one your application needs, please email us before you purchase this item. Include a cellular phone photo of the one you are replacing, for the Shop Foreman to look at. Also, include the year, make, model and trim level to assist in the identification of the vehicle application.
If you have any questions, before you buy this kit, please contact us because we want to send you the right part the first time. A few quick emails can make all the difference in the long run. This will give us the chance to address concerns before we both have invested time and money. Also, you may have the same question as someone else which we can share by posting answers for others to learn from. Our supercharger rebuild kits are designed by the Shop Foreman for your Best Chance at Success™.
Please contact us to get more details about a supercharger rebuild kit for these or other Eaton Supercharger Models that are not listed here.
And as always, we are here if you decide it might be in your best interest to have a professional supercharger re-manufacturer service it. Yes, we can rebuild it even if you have started the service yourself. Try not to tear anything up and package all the parts up carefully.
For this supercharger we offer complete remanufacturing services. Available services include:
- Complete Supercharger Rebuild Service (quoted below)
- Rotor Coating Service
- Complete Supercharger Rebuild Kit, with re-manufactured, timed, rotor assembly with new rotor coating and parts to complete rebuild service.
- External Powder Coating Services for the supercharger and other intake component (stock and custom colors available in several surface textures including wrinkle, gloss and hammertone powder coating)
- Rescue Repair Services (Repair a tripped threaded hole, removing internal housing bore scarring, etc.)
- Pulleys in both stock and overdrive diameters
- Test, repair and replace bypass valve diaphragm assembly components
- Core exchange services, whole supercharger and rotor assembly exchanges, contact us for availability.
- And more…
To have a supercharger completely serviced by us, you send your core in for the rebuild. We have a Complete Rebuild Service which you can send your supercharger in to have performed. In this way you avoid a large core charge.
Estimate for Complete Rebuild Service for the Toyota 3.4L TRD Eaton M62 supercharger:
$1,320 Complete Supercharger Rebuild Service for the Eaton Toyota 3.4L TRD M62 with Precision Thermal Barrier Rotor Coating Service
$172 Estimated return shipping and packaging cost for most USA addresses
$1,492 Estimated total with shipping
Call for current pricing for the Toyota 3.4L Eaton M62 supercharger services.
If you decide to send in your nosedrive and have us rebuild it, the nosedrive will be returned with a bottle of supercharger oil, Eaton coupler and sealer for the reinstallation process.
Get started today on your supercharger rebuild service, knowing you have choices to fit your budget, time frame, mechanical skill level and available shop tools.
We appreciate your business.
The High Speed Lab supercharger shop
©Copyright 2023 The High Speed Lab™ All Rights Reserved.